Team-associated RC12R5.2 Manuel d'utilisateur télécharger pdf (Page 2)

:: Introduction

:: KIT Features

:: Additional Features

:: Other Helpful Items

Associated Electrics, Inc.

26021 Commercentre Dr.

Lake Forest, CA 92630

http://www.TeamAssociated.com · http://www.RC10.com · http://twitter.com/Team_Associated · http://bit.ly/AEonFacebook

Customer Service

Tel: 949.544.7500

Fax: 949.544.7501

Thank you for purchasing this Team Associated product. This assembly manual contains instructions and tips for building and

maintaining your new RC12R5.2. Please take a moment to read through this manual to help familiarize yourself with these steps.

As part of the continued development to the already successful RC12R5.1 platform, Team Associated’s Factory Team is proud to

release the RC12R5.2-FT; a 1:12 scale electric 2WD on-road race-car kit.

Behind the doors of Area 51, the Factory Team engineers have further developed the IFMAR World Champion RC12R5 platform,

optimizing the chassis for the demands of today’s ultra competitive 1:12 scale racing class. The result is the RC12R5.2-FT kit, a

perfect combination of affordable styling and race winning development.

The RC12R5.2-FT kit comes ready to assemble, and includes a host of new parts prototyped and developed by Team Associated’s

Factory Team over the last couple racing seasons. The updated chassis shifts focus purely to LiPo racing batteries, centralizing the

mass for a lower polar moment of inertia and smoother handling characteristics. The RC12R5.2 carries an updated rear pod with

a graphite cross brace for added rigidity, and side damper tubes for easy use, maintenance, and adjustment. With a ROAR

National win under its belt already, it’s easy to see that the RC12R5.2-FT is… yet another Factory Team Champion By Design!

1. IFMAR World Championship winning Dynamic Strut front end from RC12R5

• Symmetric part layout in front end assembly helps minimize necessary spare parts

• 0°, 5° and 10° active strut mounts combined to one part

• Suspension arm attaches to aluminum front bulkhead to allow for adjustable front arm spacing

2. Updated motor mount and left rear bulkhead

• 3-point upper pod plate with graphite motor mount cross-brace

∙ Cross-brace stiffens rear pod assembly, and helps minimize twisting of upper and lower rear pod plates

∙ Motor mount and left rear bulkhead sections have been thickened to prevent bending

• Rear pod has been balanced for brushless motors

3. Ultra-rigid 2.5mm thick chassis mounts centralized LiPo battery mounting position

• Centralized mass helps stabilize mass transfer in high traction conditions

• Fits any ROAR approved 3.7V Li-Po battery pack

4. Aluminum side spring retainers

• Help center side spring for accurate adjustment

• Thumb wheel shape eliminates use of allen wrench

5. Innovative thru-shaft center shock

• Consistent shock building with no rebound

6. Damper tubes for error free side damping of rear pod

• Ease of build and simplicity of design allow for a more “tweak” free rear pod

7. Pivot-Ball rear pod design

• Increased durability of fixed length rear pod link

• Tuning options isolated allowing adjustment of roll and bump independently

• Hard anodized aluminum pivot balls at each joint

Your new 12R5.2 comes unassembled and requires the following items for completion. (refer to catalog section for suggestions):

• R/C two channel surface frequency radio system with steering servo • AA-sized batteries for transmitter

• 1 cell (3.7V) LiPo battery pack • Battery charger (specific for charging LiPo batteries)

• Electronic Speed Control (ESC) • R/C electric motor

• 1:12 scale lexan race body • Lexan specific spray paint

• 1:12 scale foam tires

• 64 pitch pinion gear (size to be determined by type and wind of motor selected)

• Thread Lock (AE Part #1596) • Needle Nose Pliers • Soldering Iron • Wire Cutters

• Body Scissors (AE Part # 1737) • Reamer / Hole Punch • FT Hex Wrenches (AE Part # 1541) • Hobby Knife

• Calipers or a Precision Ruler • Silicone Shock Fluid (Refer to catalog for complete listings) • Silicone Diff Fluid (Refer to catalog for complete listings)

1 2 3 4 5 6 7 ... 21 22

Commentaires sur ces manuels

Pas de commentaire

Team-associated RC12R5.2 Manuel d'utilisateur Page 2

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Team-associated RC12R5.2