Team-associated RC10 Manuel d'utilisateur télécharger pdf (Page 17)

:: Wheels / Tires and Body - Bag J - Step 3

:: Wheels / Tires and Body - Bag J - Step 4

:: Wheels / Tires and Body - Bag J - Step 5

Painting Tips:

Body and Wing:

Your RC10 Worlds Kit comes with a clear polycarbonate

body and wing. You will need to prep the body and wing

before you can paint them. Wash the inside thoroughly

with warm water and liquid detergent. Dry the body and

wing using a clean, soft, lint-free cloth. Install the window

masks on the inside of the body. (RC cars get painted

from the inside). Using high quality masking tape, apply

tape to the inside of the body to create a design. Spray

(either rattle can or airbrush R/C specific paint) the paint

to the inside of the body (prefferably dark colors first,

lighter colors last).

NOTE: use ONLY paint that is recommended for use with

(polycarbonate) plastics. If you do not, you can

destroy the plastic body and wing!!!!).

After painting, cut the body and wing along the trim lines.

Make sure to drill or use a body reamer to make the

holes for the body mounts, wing mounts, and antenna!

6952

8-32 Steel

Locknut

6222

4-40/5-40

Nylon Locknut,

black

3977

Bearing,

3/16” X 3/8”

Build left and

right sides!

Build left and

right sides!

6332

Body

clip

6182

Wing,

clear

x2 x2

6189

Wing

mounts

4436

4-40 x 5/16”

Set Screw

6189

Wing mount

wire

TIP: Bending the

wire as shown can

help ensure the wing

buttons are parallel.

TIP: Bend wire to

create tight fit inside

wing tubes.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 29 30

Commentaires sur ces manuels

Pas de commentaire

Team-associated RC10 Manuel d'utilisateur Page 17

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Team-associated RC10